Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum foil Model 201 engineer mansy mark

الوصف

Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum foil Model 201 engineer mansy mark

Product Description Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum foil Model 201 engineer mansy mark

Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum Foil

Voltage:220V /50HZ

Power:600W-1000W  (adjustable )

Size:340mm*290mm*130mm

Sealing diametres:20mm-85mm

Packing list Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum foil Model 201 engineer mansy mark

Sealing machine *1

User manual *1

Sealing Head*1

Plug Adapter*1

Aluminum Foil 25mm*1000pcs

Notice Hand hold portable Electromagnetic medicine bottle vials sealing machine honey bottle sealer packing with 1000pcs Aluminum foil Model 201 engineer mansy mark

1, the use of the machine, the operator should always pay attention to the sensor head temperature, such as the feeling of hot hot (80 `C) should stop sealing operation, so that the sensor head cooling fan cooling fan or forced rapid cooling, So that the sensor head temperature dropped to room temperature (25 `C) and then start sealing operation, so as not to damage the temperature of the induction board is too high

2 The machine in the sealing work, should be sealed according to the size of caliber, different materials, select the appropriate sealing material and the distance between the sensor head and heating time to balance as much as possible to reduce the sealing current and prolong the use of equipment life.

3 When the input power voltage is higher than 250V or lower than 160V (panel voltage display shows the value of the display should stop the sealing operation until the power supply voltage back to normal or after the installation of automatic voltage regulator, and then sealed.

4, over-current protection function is activated, induction work is invalid, this time should be an appropriate increase in sensor head and was sealed between the distance between objects; to reduce the current.

5 When the overheat warning yellow light on the panel indicates that the main components inside the unit are overheated, the thermal protection function is activated and the sensing output is automatically stopped until the temperature drops (do not turn off the power of the whole machine). Sealing work.

6 Select the sealing film material must be sealed and the bottle of a material to, and to, tighten the compaction.

7 This machine is only applicable to plastic, glass bottles are not suitable for metal materials bottle and lid sealing.

8 This machine is not suitable for sealing diameter of less than 20 mm and greater than 100 mm of the object sealing operation.

9 The machine in the course of the use of ventilation should be to maintain a good environment, can not plug the chassis of the vents.

10 During the sealing operation, the center of the material to be sealed should be aligned with the center of the sensor head to ensure the sealing quality.